Difference between revisions of "Weather Monitoring"

From Agri4castWiki
Jump to: navigation, search
(Downscaling of forecasted weather)
(General description)
Line 4: Line 4:
 
|General layout of the weather monitoring components in MCYFS]]
 
|General layout of the weather monitoring components in MCYFS]]
  
The weather monitoring module is one of the five modules of the MCYFS. Input data that go into the module are weather station observations and weather forecast data.
+
The weather monitoring module is one of the five modules of the MCYFS and can be split in 5 procedures. The first two handle '''(1)''': [[#Acquisition of observed weather|acquisition of observed weather]] and '''(2)''': [[#Acquisition of forecasted weather|acquisition of forecasted weather]]. After acquisition the data are converted to regular distrubuted values. This conversion takes place in procedure '''(3)''': [[#Interpolation of observed weather|interpolation of observed weather]] and '''(4)''': [[#Interpolation of forecasted weather|interpolation of forecasted weather]] and results in so called 'grid weather'. Finally the grid weather from observations and forecasts is '''(5)''': [[#Aggregation to regions|aggregated]] to regions in a fifth procedure.
  
  
The module contains 5 procedures. The first two handle '''(1)''': [[#Acquisition of observed weather|acquisition of observed weather]] and '''(2)''': [[#Acquisition of forecasted weather|acquisition of forecasted weather]]. The third and forth procedure cover '''(3)''': [[#Interpolation of observed weather|interpolation of observed weather]] and '''(4)''': [[#Interpolation of forecasted weather|interpolation of forecasted weather]]. Finally the grid weather from observations and forecasts is '''(5)''': [[#Aggregation to regions|aggregated]] to regions in a fifth procedure.
+
The output of the weather monitoring module is used in two ways. In the first place as input for the [[Crop Simulation|crop simulation]] module to simulate crops behaviors and evaluate the effects of weather on crops yields. Secondly as weather indicators for a direct evaluation of alarming situations such as drought, extreme rainfall during sowing, flowering or harvest etc. For this purpose the weather data are also input for calculating [[#Climatology (long term average weather)|climatology]].
 
 
 
 
The output of the weather monitoring module is used in two ways. In the first place as input for the [[Crop Simulation|crop simulation]] module to simulate crops behaviors and evaluate the effects of weather on crops yields. Secondly as weather indicators for a direct evaluation of alarming situations such as drought, extreme rainfall during sowing, flowering or harvest etc. For this purpose the weather data are also input for calculating [[#Climatology (long term average weather)|climatology]].
 
 
 
 
 
The crops behaviors are mainly influenced by the atmospheric conditions near the earth surface. Considering the data availability, resources and purpose of the system a time scale of one day and a spatial scale of 25x25km are chosen as the resolutions to estimate crop yields at European scale.
 
  
 
==Acquisition of observed weather==
 
==Acquisition of observed weather==

Revision as of 10:07, 27 October 2010



General description

File:Architecture weather monitoring.jpg
General layout of the weather monitoring components in MCYFS

The weather monitoring module is one of the five modules of the MCYFS and can be split in 5 procedures. The first two handle (1): acquisition of observed weather and (2): acquisition of forecasted weather. After acquisition the data are converted to regular distrubuted values. This conversion takes place in procedure (3): interpolation of observed weather and (4): interpolation of forecasted weather and results in so called 'grid weather'. Finally the grid weather from observations and forecasts is (5): aggregated to regions in a fifth procedure.


The output of the weather monitoring module is used in two ways. In the first place as input for the crop simulation module to simulate crops behaviors and evaluate the effects of weather on crops yields. Secondly as weather indicators for a direct evaluation of alarming situations such as drought, extreme rainfall during sowing, flowering or harvest etc. For this purpose the weather data are also input for calculating climatology.

Acquisition of observed weather

File:Acquisition of observed weather.jpg
Acquisition of observed weather

Every day the raw data of at least 3000 stations that regularly collect one or more parameters and supply them in near real time are acquired and added to the raw station weather database. For the year 2010 over 3400 stations have contributed the database. Over time another 2800 stations have a usefull archive. Weather parameters that are collected include:

  • Precipitation (daily and 6-hourly)
  • Temperature (daily maximum, daily minimum and 3-hourly)
  • Measured radiation
  • Sunshine
  • Cloud cover
  • Vapour pressure
  • Wind speed
  • Snow depth
  • Humidity (3-hourly)


The archive data and near real time incoming parameters values are checked for errors such as temperatures that are too low or parameters values that don't change over time. Errors are corrected and the data are processed to daily parameters that fit in a uniform station weather database.

Template:Scientific box

Because some parameters that are needed in the crop simulation module are not sufficiently measured by weather stations some advanced parameters are calculated from basis parameters:

  • Calculated radiation at surface
  • Transpiration of water surface
  • Transpiration of wet bare soil
  • Evapotranspiration

Template:Scientific box

Acquisition of forecasted weather

5 products from ECMWF are loaded into the system:

  • Analysis model
  • Deterministic forecast
  • Ensemble Prediction System
  • Monthly forecast
  • Seasonal forecast

The products have a different number of forecast days and a varying number of possible results called 'members'. Different members can thought of as model runs with a slightly different initialization and thus slightly different forecast results.

Model Abbreviation Forecast days Members Spatial resolution Delivery
Analysis model HIS 1 1 0.25° x 0.25° Daily (10.30 hr)
Deterministic forecast OPE 10 1 0.25° x 0.25° Daily (12.00 hr)
Ensemble Prediction System EPS 15 51 0.5° x 0.5° Daily (14.00 hr)
Monthly forecast MON 32 50 0.5° x 0.5° Every Friday (03.00 hr)
Seasonal forecast SEA 170 40 0.25° x 0.25° Every 15th of the month (14.00 hr)

The acquired weather parameters are:

  • Precipitation
  • Temperature (daily maximum, minimum and average)
  • Dewpoint temperature
  • Global radiation
  • Snow depth
  • Wind speed

Some advanced parameters are calculated from basis parameters:

  • Vapour pressure
  • Transpiration of water surface
  • Transpiration of wet bare soil
  • Evapotranspiration


Only the HIS data are stored as archive and used for calculating climatolgy. The data of other models is replaced when a more recent data set becomes available (OPE, EPS, MON, SEA).

Template:Scientific box

Interpolation of observed weather

The interpolation is managed by a sub-system called Crop Growth Monitoring System (CGMS). All input data and output data of CGMS is stored in a relational database.

Red.gif

More information



File:Interpolation of observed weather.jpg
Interpolation of observed weather

For the current year (near real time interpolation) for each grid cell every day the most suitable stations are selected. This is based on the stations location and altitude comparison to the grid cell location and altitude. The data from the suitable stations are used to interpolate to a specific grid value for a specific day. Due to this procedure the suitable stations can differ between days and even between parameters. In case no suitable stations are found, a long term average value is substituted to ensure spatial and temporal continuity.

For interpolation of archive station weather each grid cell uses the same suitable stations for a complete year. For most recent years around 2700 stations have a sufficient temporal coverage (enough observations within one year). Only these are used in the interpolation procedure. In this way a grid weather archive is build up with daily weather for each grid cell going back to 1975.


Having the grid weather database other weather indicators can be derived:

  • average day temperature
  • climatic water balance
  • climatolgy


Some of the weather indicators are defined over an arbitrary period:

  • sum, max, min and average of a parameter
  • number of heat waves
  • longest heat wave period
  • number of hot day's
  • number of cold day's
  • number of day's with significant rainfall

Template:Scientific box

Interpolation of forecasted weather

Example of 0.25 x 0.25 degrees source grid (black dots) and 25 x 25 km target grid (gray lines)

The data of different forecast models ('source') are acquired in different spatial resolutions (sea 'Acquisition of observed weather'). The downscalling procedure converts these data into a 25x25 km ('target') resolution which can be used in the crop simulation module.


In the first part of the downscalling method parameter values for a target gridcell are derived from the 4 closest source gridcells where closer source gridcells have a higher weight (inverse distance weighting).


In the second part of the downscalling a correction is made for systematic bias (systematic deviations between estimated downscalled source data and observed target data). For instance: temperature is correlated with height. The heigt values in the source grid are different from the height values in the target grid (they sample different locations). Therefor downscalled temperature will be biased depending upon the height differences.

Template:Scientific box

Aggregation to regions

Example of 4 different administrative levels in combination with landcover type 'arable land' on 25 x 25 km grid.

The primary results of the interpolating observed stations weather and downscalled forecast weather is grid weather. To answer questions like:


'What was the average temperature in France during the last week for locations where winter wheat is grown?'


the grid weather data are aggregated to different levels of administrative regions and different levels of agri-environmental regions while weighting each gridcells for the area covered by a certain crop or landcover type. Observed grid weather and forecasted grid weather are both aggregated to (90 combinations each):

  • 4 levels of administrative regions for 12 crops and 7 landcover types
  • 2 levels of agri-environmental regions for 7 landcover types.

The aggregation of forecasted grid weather is restricted to the HIS model, OPE model and the median of all EPS member values per forecast day.


All combinations are aggregated a second time with the difference that only gridcells are taken into account that have at least 5 % coverage of a certain crop or landcover type. For example:

  • administrative region: 'country' level
  • landcover type: 'arable land'
  • threshold: 5%

In this combination all grid cells that have at least 5% coverage of landcover type 'arable land' contribute to the aggregated values for 'countries' they are contained by. The contribution of each grid cell that passes the threshold of 5% is weighted by the area covered with landcover type 'arable land'. Grid cells with less than 5% coverage are not taken into account.

Template:Scientific box

Climatology (long term average weather)

Climatology is essential to understand how current weather conditions relate to the normal situation. Long term average values are available for observed weather and forecasted weather (HIS model only) for different resolutions (25 x 25 km grid, administrative regions and agri-environmental regions).

The following parameters are available:

  • Precipitation
  • Temperature (daily maximum, minimum and average)
  • Dewpoint temperature (forecasted weather only)
  • Vapour pressure
  • Wind speed
  • Snow depth
  • Calculated radiation at surface (observed), global radiation (forecasted)
  • Transpiration of water surface
  • Transpiration of wet bare soiles
  • Evapotranspiration
  • fraction of days wit daily maximum temperature greater than 25 degrees celsius
  • fraction of days wit daily maximum temperature greater than 30 degrees celsius
  • fraction of days wit daily maximum temperature greater than 35 degrees celsius
  • fraction of days wit daily maximum temperature less than 0 degrees celsius
  • fraction of days wit daily maximum temperature less than minus 8 degrees celsius
  • fraction of days wit daily maximum temperature less than minus 10 degrees celsius
  • fraction of days wit daily maximum temperature less than minus 18 degrees celsius
  • fraction of days wit daily maximum temperature less than minus 20 degrees celsius
  • fraction of days wit rainfall greater than 5 mm
  • fraction of days wit rainfall greater than 10 mm
  • fraction of days wit rainfall greater than 15 mm
Template:Scientific box